Crunch 217B Specifications download pdf (Page 26)

Dashboard mounting

1. Select an area relatively level, clean, and dry.

Adhere one part of the enclosed hook-and-loop

fastener to this area and the other part to the bottom of

the unit.

2. Fasten the unit to the area by placing the hook-

and-loop pieces together.

Connecting the Power

The detector is designed to operate on most DC12V

negative ground vehicle electrical systems. The power cord

provided with the detector has a cigarette lighter socket plug

at one end and a small connector at the other.

1. Insert the small connector into the jack on the side of

the detector.

2. Insert the other end into the cigarette lighter socket of

your vehicle.

If the detector does not operate when you turn it on,

remove the adapter from the cigarette lighter socket and

carefully check the socket for debris. Also, check the fuse in

the adapter and your vehicle's fuse box.

Replacing the Fuse

If the detector CRUNCH stops operating, the fuse in the

cigarette lighter plug might be blown. If it has blown, follow

these steps to replace it:

1. To replace the fuse, unscrew the top of the plug.

2. Remove the fuse and check the fuse to see if it has

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 34 35

No comments

Crunch 217B Specifications Page 26